Kính chào quý khách đến với website của chúng tôi !

sale18@tmpvietnam.com

danh mục sản phẩm

hỗ trợ tư vấn

0977 204 306

BỘ PHẬN KINH DOANH

Mr. Vũ: 0977 204 306

HỖ TRỢ KỸ THUẬT

Mr. Duy: 0914 408 769

THỐNG KÊ TRUY CẬP

Đang online: 20

Truy cập ngày: 31

Truy cập tuần: 643

Truy cập tháng: 570

Tổng truy cập: 251335

liên kết website

Sản phẩm

ĐẠI LÝ PHÂN PHÔI CEMP TẠI VIETNAM
XUẤT XỨ:

Italia

TÌNH TRẠNG:

Mới 100%

MÔ TẢ:

Đại lý CEMB Việt Nam

Công Ty Tăng Minh Phát hân hạnh là Đại lý phân phối CEMB chính thức tại Việt Nam

Thông Tin Sản Phẩm
Đánh Giá

CEMB VIETNAM

Mục lục nội dụng

1. Máy đo độ rung cầm tay CEMB

a. N130-GL CEMB

b. N130 CEMB

c. N600 CEMB

d. N300 CEMB

e. Al30 CEMB

f. AL10CEMB

2. Cảm biến đo độ rung CEMB

a. TR-26 CEMB

b. TR-27 CEMB

c. TR-I CEMB

d. TR-NC/8 CEMB

3. Hệ thống phân tích và cân bằng Cemb | Industrial Equipment Division

a. Máy cân bằng theo trục hoành ( theo chiều ngang)

b. Máy cân bằng theo trục tung ( theo chiều dọc)

c. Máy cân bằng theo mục đích sử dụng

4. Máy cân bằng lốp Cemb

The CNC machinery used by CEMB in the production phase are the very best the market has to offer.

These are machines embodying the latest technological developments, exclusively with numerical control. Only in this way can CEMB guarantee total control over the quality of the critical parts on the balancing machines.

1. Máy đo độ rung cầm tay CEMB

CEMB thiết kế và sản xuất đầy đủ các thiết bị để đo độ rung và hiệu chỉnh sự mất cân bằng trên máy quay.
Máy đo độ rung cầm tay Cemb dựa trên bộ vi xử lý của thế hệ mới nhất, cho phép người dùng thực hiện các hệ thống giám sát mạnh mẽ và linh hoạt, đơn giản hóa việc cài đặt trước các phạm vi đo và mức báo động.
Máy đo độ rung của hãng Cemb giải quyết dễ dàng và chính xác mọi vấn đề rung trên máy trong quá trình vận hành: đo rung, cân bằng bằng các chương trình ghi nhớ, phân tích rung khi kết thúc quá trình phân tích

a. Máy đo độ rung CEMB N130-GL

Single Channel portable instrument with 4,3" graphic display - Specific for grinding wheel balancing

GENERAL CHARACTERISTICS	Color Display 4,3” TFT LCD (480 x 272 pixel) New EasyClick tactile keyboard with embossed keys
MEASUREMENT TYPES	Effective value (RMS) Peak value (Pk) Peak-to-peak value (PP)
MEASURING PERFORMANCE	Bandwidth: 1-10 KHz FFT Resolution: Max 3200 lines Tacho: Up to 250000 rpm
UNITS OF MEASUREMENT	Acceleration: [g] Velocity: [mm/s] or [inch/s] Displacement: [μm] or [mils] Frequency: [Hz] or [Cpm]
INPUT	1 measuring channels IEPE sensor, accelerometer and velocimeter (with a specify cable pluggable on a BNC for read any dinamic signal max. 5V-PP) 1 photocell channel (velocity and angle reference) 1 MicroUSB 2.0 port for data transfer 1 jack plug for battery charger
AMBIENT	Temperature: from -20° to +70° C Air humidity: from 0 to 95% without condensate Protection: IP54
POWER SUPPLY	Long Life Battery: > 8 hours based on typical use Charging time: 2,5 hours for 80% recharge 4 hours for 100% recharge Rechargeable 3100 mAh Lithium battery Power supply-battery charger for 100-240 V, 50/60 Hz (24 V, 1.5 A)
CARRYING CASE DIMENSIONS AND WEIGHT	Approx. 370(L) x 300 (H) x 115(D) 1800 g

b. Thiết bị kiểm tra độ rung CEMB N130

Single Channel Vibrometer and Machine Analyzer with 4,3" graphic display - Vibration and Smart Analysis up to 10 KHz

GENERAL CHARACTERISTICS	Display a colori 4,3” TFT LCD (480 x 272 pixel) Nuova tastiera tattile EasyClick con tasti in rilievo Memoria interna: 14,8 Gb (espandibile a 128Gb) Interfaccia utente multi lingua
MEASUREMENT TYPES	Effective value (RMS) Peak value (Pk) Peak-to-peak value (PP)
MEASURING PERFORMANCE	Bandwidth: 1-10 KHz FFT Resolution: Max 3200 lines Tacho: Up to 250000 rpm
UNITS OF MEASUREMENT	Acceleration: [g] Velocity: [mm/s] or [inch/s] Displacement: [μm] or [mils] Frequency: [Hz] or [Cpm]
INPUT	1 measuring channels IEPE sensor, accelerometer and velocimeter (with a specify cable pluggable on a BNC for read any dinamic signal max. 5V-PP) 1 photocell channel (velocity and angle reference) 1 MicroUSB 2.0 port for data transfer 1 jack plug for battery charger
AMBIENT	Temperature: from -20° to +70° C Air humidity: from 0 to 95% without condensate Protection: IP54
POWER SUPPLY	Long Life Battery: > 8 hours based on typical use Charging time: 2,5 hours for 80% recharge 4 hours for 100% recharge Rechargeable 3100 mAh Lithium battery Power supply-battery charger for 100-240 V, 50/60 Hz (24 V, 1.5 A)
CARRYING CASE DIMENSIONS AND WEIGHT	Approx. 370(L) x 300 (H) x 115(D) 1800 g

c. Máy đo độ rung cầm tay N600 CEBM

N600 Multipurpose Dual channel vibrometer for vibration analysis and balancing.

Portable two-channel instrument with a 7” color display for balancing and for vibration analysis up to 10 KHz .
The mini USB port enables data transfer to a PC by memory stick.
For those who want to perform complex functions easily and intuitively.

FUNCTIONS	Measurement of the overall vibration value (acceleration, velocity, displacement) • Vibration phase measurement • Analysis of vibration in the frequency range • Monitoring overall vibration in relation to time or velocity (Bode plot) • Balancing of rotating bodies in operating conditions on 1 or 2 planes • Waveform
MEASUREMENT TYPES	Effective value (RMS) • Peak value (Pk) • Peak-to-peak value (PP)
UNITS OF MEASUREMENT	Acceleration: [g] • Velocity: [mm/s] or [inch/s] • Displacement: [μm] or [mils] • Frequency: [Hz] or [Cpm]
INPUT	2 independent and simultaneous measuring channels (accelerometer, velocimeter, non-contact, any signal max. 5V-PP) • 1 photocell channel (velocity and angle reference) • 2 USB ports for data transfer
VIBROMETER FUNCTION	Measurement of the overall vibration value in predefined frequency bands (10-1000Hz; 3-300Hz; 10-10000Hz) or bands defined by the user (within the range of 3-20000Hz) • Measurement of 1x fundamental vibration value and phase • Measurement of rotating body velocity
FFT FUNCTION (ANALYSIS IN FREQUENCY)	FFT analysis (manual/trigger) • Maximum settable frequency (25; 100; 500; 1000Hz; 2.5; 5; 10; 15kHz) • Resolution (100; 200; 400; 800; 1600; 3200 lines) • Number of averages: from 1 to 16 • List of main peak values
MONITOR - DATA LOGGER FUNCTIONS	Recording and display of overall vibration trend over time • Storage and display of vibration trend and phase when rotation velocity changes
BALANCING FUNCTION	Number of correction planes: from 1 to 2 • Graphic indicator of measurement stability • Balancing procedure, guided step by step, with option for editing and intermediate changes • Vectorial breakdown of the unbalance • Correction by adding or removing material
GENERAL CHARACTERISTICS	Display: 7” colour LED-backlit TFT LCD • A/D converter: 24 bit resolution • Dimensions: approx. 225 x 200 x 50 mm • Weight: 1.4 kg
OPERATING CONDITIONS	Temperature: from -10° to +50° C • Air humidity: from 0 to 95% without condensate
POWER SUPPLY	Rechargeable 6Ah Lithium battery • Charging time: < 5 hours (when battery is fully discharged) • Power supply-battery charger for 100-240 V, 50/60 Hz (24 V, 1.5 A) • Battery life: > 8 hours based on typical use

d. Thiết bị đo độ rung cầm tay 300 CEMB

Pocket balancer easy to use Dual channel vibrometer, analyzer, interfaceable to PC

Compact two-channel instrument for balancing and for Vibration Analysis up to 1 KHz.
Backlit B/W Graphic display. Interfaced with a PC for the printing of graphics and certificates.
For operators who use the machine intensively on the field.
Compact and ergonomic , suitable for heavy duty environments.

Functions:	Measurement of the overall vibration value (acceleration, velocity, displacement) • Measurement of synchronous vibration value and phase • Analysis of vibration in the frequency range • Field balancing of rotating bodies on 1 or 2 planes
Measurement types:	RMS value (RMS)
Units of measurement:	Acceleration: [g] • Velocity: [mm/s] or [inch/s] • Displacement: [µm] or [mils] • Frequency: [Hz] or [Rpm]
Inputs:	2 independent and simultaneous measuring channels (acceleration transducer, velocity transducer) • 1 photocell channel (velocity and angle reference) • 1 mini USB port for data transmission • battery charger input
Vibrometer functions:	Measurement of the overall vibration value in predefined frequency bands (1-100Hz 2-200Hz 5-500Hz 10-1000Hz) • Measurement of the value and phase of the vibration of the main frequency and the first five harmonics. • List of the five highest peaks.